Machined, individual seals through CNC turning technology
Machined, individual solutions through CNC turning technology, from 1 piece up to several thousand pieces, from ID 1mm (0.039in) up to OD 2,500mm (98in); each profile in every dimension out of a large variety of high-quality sealing materials.
Fluid Pneumatic Seals – Wipers
Abstreifer, TA02I
Description
Standard Application
Hydraulik, einfach wirkend
Installation Spaces
Einbauraum gemäss ISO 6195 Typ C
Sliding Speed
maximum 5 m/s
Directions of Movement
Conditional Directions of Movementen
Please be aware that the statements above concerning working pressure and sliding speed are maximum values, which can vary according to the material used. Please refer to the Table of Recommended Materials below for corresponding information.
Recommended Elastomeres for Abstreifer, TA02I
| Material with Note |
Approval FDA, KTW etc. |
Temperature in °C |
Shore A DIN53505 |
Shore D DIN53505 |
|
|---|---|---|---|---|---|
| XHPU solid | – | -25 bis 110 | – | 57 (± 3) |  |
| HPU premium | – | -30 bis 110 | 95 (± 3) | 49 (± 3) | |
| HPU taiga | – | -50 bis 105 | 95 (± 5) | 48 (± 3) | |
| XHPU lubric | – | -30 bis 110 | 96 (± 5) | 49 (± 3) | |
| HPU diet | FDA, 3A-sanitary | -40 bis 100 | 95 (± 5) | 48 (± 3) | |
| NBR standard | – | -35 bis 110 | 85 (± 5) | – | |
| HNBR diet | FDA | -30 bis 150 | 82 (± 5) | – | |
| EPDM spring | W270, KTW | -40 bis 150 | 88 (± 5) | – | |
| FPM diet-br | FDA | -25 bis 220 | 85 (± 5) | – | |
| Aflas® standard | – | -10 bis 220 | 85 (± 5) | – | |
Along with the material(s) recommended here, our product Abstreifer, TA02I is also available in other materials.
Please see our Overview of Available Materials.
The stated working conditions (pressure, temperature, speed etc.) are maximum values and mustn’t be applied simultaneously. For special applications, please contact our application engineers, who can design the product according to your requirements. Generally, we recommend product testing for special applications, and we cannot be held liable.