Machined, individual seals through CNC turning technology
Machined, individual solutions through CNC turning technology, from 1 piece up to several thousand pieces, from ID 1mm (0.039in) up to OD 2,500mm (98in); each profile in every dimension out of a large variety of high-quality sealing materials.
Fluid Pneumatic Seals – Wipers
Abstreifer, TA26F
Description
Standard Application
Hydraulik / Pneumatik, doppelt wirkend
Sliding Speed
maximum 10 m/s
Directions of Movement
Conditional Directions of Movement
Please be aware that the statements above concerning working pressure and sliding speed are maximum values, which can vary according to the material used. Please refer to the Table of Recommended Materials below for corresponding information.
Recommended Composite Materials for Abstreifer, TA26F
| Material with Note |
Approval FDA, KTW etc. |
Temperature in °C |
|
|---|---|---|---|
| XHPU solid / NBR70 | – | -30 bis 100 |  |
| XHPU lubric / NBR70 | – | -20 bis 100 | |
| PTFE virgin diet / NBR70 | – | -30 bis 100 | |
| PTFE glass wear / NBR70 | – | -30 bis 100 | |
| PTFE bronze wear / FPM75 | – | -20 bis 200 | |
| PTFE carbon slide / FPM75 | – | -20 bis 200 | |
| UHMWPE diet / NBR70 | – | -30 bis 80 | |
| UHMWPE diet / MVQ70 | – | -55 bis 80 | |
Along with the material(s) recommended here, our product Abstreifer, TA26F is also available in other materials.
Please see our Overview of Available Materials.
The stated working conditions (pressure, temperature, speed etc.) are maximum values and mustn’t be applied simultaneously. For special applications, please contact our application engineers, who can design the product according to your requirements. Generally, we recommend product testing for special applications, and we cannot be held liable.