Machined, individual seals through CNC turning technology
Machined, individual solutions through CNC turning technology, from 1 piece up to several thousand pieces, from ID 1mm (0.039in) up to OD 2,500mm (98in); each profile in every dimension out of a large variety of high-quality sealing materials.
Fluid Pneumatic Seals – Guide Ring Systems
Guide Ring, TF02G
Description
Standard Application
Hydraulics / Pneumatics
general Application
Directions of Movementen
Conditional Directions of Movement
Please be aware that the statements above concerning working pressure and sliding speed are maximum values, which can vary according to the material used. Please refer to the Table of Recommended Materials below for corresponding information.
Recommended Thermoplastics for Guide Ring, TF02G
| Material with Note |
Approval FDA, KTW etc. |
Temperature in °C |
Shore D DIN53505 |
|
|---|---|---|---|---|
| POM diet | – | -50 bis 90 | 85 (± 3) |  |
| PA6G wear | – | -40 bis 110 | 85 (± 3) | |
| PTFE glass wear | – | -200 bis 260 | 58 (± 3) | |
| PTFE bronze wear | – | -200 bis 260 | 60 (± 3) | |
| PTFE bronze wear 60% | – | -200 bis 260 | 60 (± 3) | |
| HGW 200 | – | -40 bis 130 | – | |
Along with the material(s) recommended here, our product Guide Ring, TF02G is also available in other materials.
Please see our Overview of Available Materials.
The stated working conditions (pressure, temperature, speed etc.) are maximum values and mustn’t be applied simultaneously. For special applications, please contact our application engineers, who can design the product according to your requirements. Generally, we recommend product testing for special applications, and we cannot be held liable.