Machined, individual seals through CNC turning technology
Machined, individual solutions through CNC turning technology, from 1 piece up to several thousand pieces, from ID 1mm (0.039in) up to OD 2,500mm (98in); each profile in every dimension out of a large variety of high-quality sealing materials.
Fluid Pneumatic Seals – Piston Seals
Piston Seal, TK37P
Standard Application
Hydraulic, double acting
Pressure
maximal 50 bar
Directions of Movementen
Conditional Directions of Movementen
Please be aware that the statements above concerning working pressure and sliding speed are maximum values, which can vary according to the material used. Please refer to the Table of Recommended Materials below for corresponding information.
Recommended Elastomeres for Piston Seal, TK37P
| Material with Note |
Approval FDA, KTW etc. |
Temperature in °C |
Shore A DIN53505 |
Shore D DIN53505 |
|
|---|---|---|---|---|---|
| HPU premium | FDA | -30 bis 110 | 94 (± 3) | 49 (± 3) |  |
| HPU lubric | – | -30 bis 110 | 96 (± 3) | 49 (± 3) | |
| HPU taiga | – | -50 bis 105 | 95 (± 5) | 48 (± 3) | |
| HPU diet | FDA, 3A-sanitary | -40 bis 100 | 95 (± 5) | 48 (± 3) | |
Along with the material(s) recommended here, our product Piston Seal, TK37P is also available in other materials.
Please see our Overview of Available Materials.
The stated working conditions (pressure, temperature, speed etc.) are maximum values and mustn’t be applied simultaneously. For special applications, please contact our application engineers, who can design the product according to your requirements. Generally, we recommend product testing for special applications, and we cannot be held liable.