Machined, individual seals through CNC turning technology
Machined, individual solutions through CNC turning technology, from 1 piece up to several thousand pieces, from ID 1mm (0.039in) up to OD 2,500mm (98in); each profile in every dimension out of a large variety of high-quality sealing materials.
Material „PTFE bronze wear“
Standard colour: bronze
- Low wear PTFE
- Resistant to mineral oil, HFC, HFD-U, HETG=biological base, acid oils and gases, cold water, hot water and steam, diluted acids and bases
- Applicable for spring assisted sealing elements
| Available Diameters | bis 1,500 mm |
| Temperature | -200 bis 260 °C |
| Shore D (DIN53505) | 60 (± 3) |
Resistant to
- [RESISTANT] Mineral oil
- [RESISTANT] HFC
- [RESISTANT] HFD-U
- [RESISTANT] HETG = biological base
- [RESISTANT] Acid oils and gases
- [RESISTANT] Water cold
- [RESISTANT] Water hot and steam
- [RESISTANT] Diluted acids and base
Legend
- [RESISTANT] resistant
- [NOT RESISTANT] not resistant
- [PARTLY RESISTANT] partly resistant
Sealing Elements
- [PARTLY SUITABLE] Rod and Piston Seals
- [PARTLY SUITABLE] Wiper Seals
- [NOT SUITABLE] Rotary Seals
- [NOT SUITABLE] Static Seals
- [SUITABLE] Spring-assisted Sealing Elements
- [PARTLY SUITABLE] Backup Rings and Guide Rings
Legend
- [SUITABLE] suitable
- [NOT SUITABLE] not suitable
- [PARTLY SUITABLE] partly suitable
* POM diet will be replaced by PA6G for diameters (Ø) 280mm (11.02in) and above (please note the application limits)